TM-5-2350-377-14-P

ARMORED COMBAT EARTHMOVER (ACE), M9

TECHNICAL MANUAL; OPERATOR'S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) SUPPORTING THE HYDRAULIC BLADE FOLDER-TRACK TENSIONER (HBF-TT)

TM-5-2350-377-14-P - Page 138 of 335

TM 5-2350-377-14&P

0022 00

APRON AND DOZER ASSEMBLY REPLACEMENT AND REPAIR - continued

REPAIR

NOTE

Steps 1 and 2 apply to Figure 28.

1. Repair apron and dozer assembly by replacing damaged or worn parts and by using general repair methods.

If

authorized, weld (TM 9-237) and straighten.

2. Bond rubber pad (1) to plate (2) with adhesive.

Figure 28.

Rubber Pad and Plate.

ASSEMBLY

NOTE

Step 1 applies to Figure 29.

1. Using hammer and soft drift or wood dowel, install two outer bushings (1) and two inner bushings (2) on apron (3).

Coat inside of bushings (1) and (2) with grease.

Figure 29.

Installation of Bushings onto Apron.

0022 00-11