TM-5-2350-377-14-P

ARMORED COMBAT EARTHMOVER (ACE), M9

TECHNICAL MANUAL; OPERATOR'S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) SUPPORTING THE HYDRAULIC BLADE FOLDER-TRACK TENSIONER (HBF-TT)

TM-5-2350-377-14-P - Page 131 of 335

TM 5-2350-377-14&P

0022 00

APRON AND DOZER ASSEMBLY REPLACEMENT AND REPAIR - continued

NOTE

Steps 5 and 6 apply to Figure 19.

5. Remove locknut (12), screw (13), and pivot pin (14) from each side of vehicle.

Discard locknuts (12).

WARNING

Personnel must stand clear during lifting operations.

A swinging or shifting load may result

in injury to personnel.

6. Lift apron and dozer assembly (2) up and away from vehicle.

Place apron and dozer assembly (2) on blocks on level

surface.

Figure 19.

Lifting Apron and Dozer Assembly.

DISASSEMBLY

NOTE

If complete disassembly of the apron and dozer assembly is necessary, follow steps 1

through 6.

For disassembly of the apron and dozer assembly, follow steps 7 through 13.

1.

Headlight assembly

.

Refer to WP 0016 00.

0022 00-4