TM-5-2350-377-14-P

ARMORED COMBAT EARTHMOVER (ACE), M9

TECHNICAL MANUAL; OPERATOR'S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) SUPPORTING THE HYDRAULIC BLADE FOLDER-TRACK TENSIONER (HBF-TT)

TM-5-2350-377-14-P - Page 133 of 335

TM 5-2350-377-14&P

0022 00

APRON AND DOZER ASSEMBLY REPLACEMENT AND REPAIR - continued

NOTE

Steps 3a through 3c apply to Figure 21.

3.

Extensions

.

a. Remove four screws (1), washers (2), and apron extension (3) from each side of apron and dozer assembly (4).

Pry or hammer extension (3) to loosen from each side of apron and dozer assembly (4).

b. Remove five screws (5), washers (6), and dozer extension (7) from each side of apron and dozer assembly (4).

Pry or hammer to loosen extension (7) from each side of apron and dozer assembly (4).

c. Remove three screws (8), lockwashers (9), and dozer extension (10) from each side of apron and dozer assembly

(4).

Pry or hammer to loosen extension (10) from apron and dozer assembly (4).

Discard lockwashers (9).

Figure 21.

Removal of Extensions.

0022 00-6