TM-5-2350-377-14-P

ARMORED COMBAT EARTHMOVER (ACE), M9

TECHNICAL MANUAL; OPERATOR'S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) SUPPORTING THE HYDRAULIC BLADE FOLDER-TRACK TENSIONER (HBF-TT)

TM-5-2350-377-14-P - Page 147 of 335

TM 5-2350-377-14&P

0022 00

APRON AND DOZER ASSEMBLY REPLACEMENT AND REPAIR - continued

NOTE

Steps 3 and 4 apply to Figure 38.

3. Coat two pivot pins (1) with grease, and install apron (2) on hull with two pivot pins (1).

NOTE

Apply lubricating oil to threads of screws prior to installation.

4. Secure two pivot pins (1) to hull with screws (3) and locknuts (4).

Tighten screws (3) to 28-32 lb-ft (38-43 N m).

Figure 38.

Installation of Apron onto Hull.

NOTE

Step 5 applies to Figure 39.

5. Coat apron hydraulic cylinder pins (5) wiht grease, and install two cylinders (6) on apron (2) with pins (5), screws (7),

four washers (8), and two nuts (9).

Remove chains from shackles.

Remove blocks.

Figure 39.

Hydraulic Cylinders.

0022 00-20