TM-5-2350-377-14-P

ARMORED COMBAT EARTHMOVER (ACE), M9

TECHNICAL MANUAL; OPERATOR'S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) SUPPORTING THE HYDRAULIC BLADE FOLDER-TRACK TENSIONER (HBF-TT)

TM-5-2350-377-14-P - Page 152 of 335

TM 5-2350-377-14&P

0023 00

DOZER BLADE REPLACEMENT AND REPAIR - continued

DISASSEMBLY

NOTE

Steps 1 and 2 apply to Figure 43.

1. Remove four screws (1), lockwashers (2), and shackle (3) from dozer blade (4).

Discard lockwashers (2).

2. Using hammer and soft drift, drive out eight bushings (5) from inner and outer pivot points of dozer blade (4).

Discard bushings (5).

Figure 43.

Shackle and Dozer Blade.

ASSEMBLY

NOTE

Steps 1 and 2 apply to Figure 44.

1. Install eight bushings (1) on inner and outer pivot points of dozer blade (2).

2. Install shackle (3) on dozer blade (2) with four lockwashers (4) and screws (5).

0023 00-3