TM 5-2350-377-14&P
DISASSEMBLY
NOTE
Steps 1 and 2 apply to Figure 3.
Screws are captive to spacer and stay on spacer.
1. Loosen four screws (item 6) on plate spacer (item 7) and remove plate spacer (item 7) from headlight (item 2).
Figure 3.
Headlight Plate Spacer.
2. Pry out gasket (item 4) together with lens (item 5) with screwdriver in slot (item 1) from headlight (item 2).
HEADLIGHT PLATE SPACER, LIGHT LENS, AND GASKET REPLACEMENT
0017 00
0017 00-1
INITIAL SETUP
Tools/Test Equipment
Tool kit, general mechanic's
(Item 6, WP 0056 00)
Equipment Conditions
Front of vehicle blocked
(TM 5-2350-262-20-1)
Hydraulic pressure relieved (TM 5-2350-262-20-1)
Negative battery cables disconnected
(TM 5-2350-262-20-1)
6
7
5
1
2
4
3