TM-5-2350-377-14-P
ARMORED COMBAT EARTHMOVER (ACE), M9
TECHNICAL MANUAL; OPERATOR'S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) SUPPORTING THE HYDRAULIC BLADE FOLDER-TRACK TENSIONER (HBF-TT)
TM-5-2350-377-14-P - Page 114 of 335
TM 5-2350-377-14&P
DISASSEMBLY
CAUTION
Do not turn or twist headlight during installation.
Turning or twisting headlight can damage
headlight wiring harness.
NOTE
Installation procedures for the headlight are the same for both sides of the vehicle.
The right
side is shown here.
Steps 1 through 3, Disassembly and Assembly, apply to Figure 2.
1. Remove four bolts (item 2), lockwashers (item 3), and flat washers (item 4) from headlight (item 1) and apron (item
6).
HEADLIGHT ASSEMBLY REPLACEMENT
0016 00-1
0016 00
INITIAL SETUP:
Tools/Test Equipment:
Tool kit, general mechanic's
(Item 6, WP 0056 00)
Materials/Parts:
Lockwasher (Item 37, WP 0048 00, Figure 10)
Equipment Conditions:
Front of vehicle blocked (TM 5-2350-262-20-1)
Hydraulic pressure relieved (TM 5-2350-262-20-1)
Negative battery cables disconnected (TM 5-2350-
262-20-1)
2
3
4
1
9
8
7
5
6
Figure 2.
Headlight Assembly.
Back to Top
