TM-5-2350-377-14-P
ARMORED COMBAT EARTHMOVER (ACE), M9
TECHNICAL MANUAL; OPERATOR'S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) SUPPORTING THE HYDRAULIC BLADE FOLDER-TRACK TENSIONER (HBF-TT)
TM-5-2350-377-14-P - Page 31 of 335
TM 5-2350-377-14&P
4. Remove two clips (5), then pull out two dozer blade lockpins (7).
0005 00
0005 00-2
OPERATIONS UNDER USUAL CONDITIONS - continued
CAUTION
Remove clips and dozer lockpins before folding the blade to prevent damage to the equipment.
3. Remove pin assembly (2) and dozer blade latch (4) from each side of apron (3).
2
3
4
6
3
7
5
5.
Secure dozer blade (6) by installing dozer blade latch (4) in forward position, with pin assembly (2) on each
side of apron (3) in middle hole.
6.
Install two dozer blade lockpins (7) in dozer blade (6), and secure dozer lockpins (7) with two clips (5).
Back to Top
