TM-5-2350-377-14-P
ARMORED COMBAT EARTHMOVER (ACE), M9
TECHNICAL MANUAL; OPERATOR'S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) SUPPORTING THE HYDRAULIC BLADE FOLDER-TRACK TENSIONER (HBF-TT)
TM-5-2350-377-14-P - Page 40 of 335
TM 5-2350-377-14&P
GENERAL
a. This work package provides information for identifying and correcting malfunctions that may develop while operating
your M9 ACE.
b. The Troubleshooting Malfunctions/Symptom Index
lists common malfunctions that may occur and refers you to
the proper page for a troubleshooting procedure.
c. If you are unsure of the location of an item mentioned in troubleshooting, refer to WP 0002 00 or to the maintenance
task in this manual where the item is replaced.
d. Before performing troubleshooting, read and follow all safety instructions found in the Warning Summary at the
beginning of this manual.
e. This section cannot list all the malfunctions that may occur, nor all tests or inspections and corrective actions.
If
a malfunction is not listed or is not corrected by the corrective action listed, notify your supervisor.
f.
When troubleshooting a malfunction:
•
Locate the symptom or symptoms in the Troubleshooting Malfunctions/Symptom Index that best
describe the malfunction.
•
Turn to the page
where the troubleshooting procedures for the malfunction in question are described.
Headings at the top of each page show how each troubleshooting procedure is organized:
MALFUNCTION,
TEST OR INSPECTION, and CORRECTIVE ACTION.
The malfunctions, tests or inspections, and
corrective actions are indented to line up under the appropriate heading.
•
Perform each step in the order listed until the malfunction is corrected.
DO NOT perform any maintenance
task unless the troubleshooting procedure tells you to do so.
EXPLANATION OF COLUMNS
Explanations of the columns in WP 0008 00, troubleshooting, are as follows:
MALFUNCTION.
A visual or operational indication that something is wrong with the M9 ACE.
TEST OR INSPECTION.
A procedure to isolate the problem in a component or system.
CORRECTIVE ACTION.
A procedure to correct the problem.
CHAPTER 3
TROUBLESHOOTING PROCEDURES
TROUBLESHOOTING INDEX
0007 00-1
0007 00
Back to Top
