TM-5-2350-377-14-P
ARMORED COMBAT EARTHMOVER (ACE), M9
TECHNICAL MANUAL; OPERATOR'S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) SUPPORTING THE HYDRAULIC BLADE FOLDER-TRACK TENSIONER (HBF-TT)
TM-5-2350-377-14-P - Page 48 of 335
TM 5-2350-377-14&P
0008 00-7
WIRING HARNESS AND CABLE REPAIR - continued
TERMINAL-TYPE CABLE CONNECTORS REPLACEMENT
a. Strip cable insulation equal to depth of terminal well.
b. Slide insulator over cable.
c. Insert cable into terminal well and crimp.
d. Slide insulator over crimped end of terminal.
MALE CABLE CONNECTOR REPLACEMENT
a. Strip cable insulation equal to depth of ferrule well.
b. Slide shell over cable, and remove C-washer.
c. Insert cable into ferrule and crimp.
d. Place C-washer over cable at crimped junction and slide shell over C-washer and ferrule.
FEMALE CABLE CONNECTOR (WITH WASHER) REPLACEMENT
a. Strip cable insulation approximately 1/8 inch (3 mm).
b. Slide shell and washer over cable.
c. Place cable into cylindrical end of terminal and crimp.
d. Slide shell and washer over terminal.
0008 00
CABLE
INSULATOR
TERMINAL
CABLE
SHELL
C-WASHER
FERRULE
SLEEVE
TERMINAL
CABLE
SHELL
Back to Top
