TM-5-2350-377-14-P
ARMORED COMBAT EARTHMOVER (ACE), M9
TECHNICAL MANUAL; OPERATOR'S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) SUPPORTING THE HYDRAULIC BLADE FOLDER-TRACK TENSIONER (HBF-TT)
TM-5-2350-377-14-P - Page 52 of 335
TM 5-2350-377-14&P
GENERAL HYDRAULIC SYSTEM REPAIR METHODS - continued
CAUTION
Nicks, cuts, or scratches are cause for parts replacement or repair.
Failure to comply may
result in damage to equipment.
e. 4-bolt Split Flange.
The 4-bolt split flange has a flange head that is clamped to a smooth face.
The flange head
uses a preformed packing that is squeezed between the head and the face.
The face and end of flange head must
be free of nicks and scratches to seal properly.
The packing must also be free of nicks and cuts, or the connection
will leak.
INSTALLING PACKINGS (O-RINGS)
a. Before installing a new packing, inspect the threads and packing seat (cavity) for nicks, cracks, and distortion.
Replace any damaged components.
b. Ensure the packing is the correct type and size.
c. Before installation, lubricate the new packing with OE/HDO-10 (Item 15, WP 0055 00).
0008 00-11
0008 00
PORT FACE
4-BOLT SPLIT
FLANGE
O-RING (PACKING)
CLAMP HALVES
FLANGE HEAD
Back to Top
