TM-5-2350-377-14-P
ARMORED COMBAT EARTHMOVER (ACE), M9
TECHNICAL MANUAL; OPERATOR'S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) SUPPORTING THE HYDRAULIC BLADE FOLDER-TRACK TENSIONER (HBF-TT)
TM-5-2350-377-14-P - Page 33 of 335
TM 5-2350-377-14&P
0005 00-4
OPERATING PROCEDURES - continued
2. Place SPRUNG/UNSPRUNG control lever (1) in SPRUNG position.
WARNING
When unfolding dozer blade, work on blade latches from side of vehicle only. Failure
to comply may result in serious injury to personnel.
CAUTION
Remove clips, dozer lockpins, and blade latch before unfolding the blade to prevent damage
to equipment.
3. Remove two clips (5). Pull out two dozer lockpins (7). Remove pin assembly (2) and blade latch (4) from each side
of apron (3).
0005 00
1
2
3
4
3
7
5
Back to Top
