TM-5-3805-254-14-P-2

TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW, IHC MODEL F-5070 (CCE)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, GENERAL SUPPORT AND DEPT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS INFORMATION AND SUPPLEMENTAL MAINTENANCE INSTRUCTIONS)

JUNE 1980

TM-5-3805-254-14-P-2 - Page 404 of 894

TRUCK SERVICE MANUAL

ENGINE

Gear Case Cover

1. Shellac new gasket to gear case cover. Check current

Parts Catalog for correct gear case cover and gear case

cover

gasket part numbers.

2. Install gear cover in place over dowels. Torque

capscrews to 45 to 50 ft-lb. [6.2 to 6.9 kg ml, trim off

excess gasket material at pan flange mounting area.

3. Make sure that bottom surface of cover is within

+0.004 inch [0.10 mm] of flush with oil pan surface of

block. Fig.14-12.