TM 5-5420-202-20-2
FUEL-WATER SEPARATOR OPERATIONAL TESTS (Sheet 1 of 11)
PROCEDURE INDEX
PROCEDURE
PAGE
Manual Drain Test
7-223
Automatic Drain Test
7-226
15-Second Drain Test
7-228
Sequential Drain Test
7-230
TOOLS: 1/8 in. drive punch
Connector pliers
5/16 in. combination box and open end wrench
One 3 ft. jumper wire with alliga-
7/16 in. combination box and open end wrench
tor clips on both ends
1/2 in. combination box and open end wrench
Two 10 ft. leads with alligator
9/16 in. combination box and open end wrench
clips on one end and probe on
7/16 in. socket with 1/2 in. drive
other end
1/2 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
5 in. extension with 1/2 in. drive
Hammer
8 in. adjustable wrench
Screwdriver, cross tip
SUPPLIES:
24 volt D.C. power source
Fuel can
1/8 in. pipe plug (2 required)
Drip pan
Metal container (2 gal. capacity)
Gasket
Lockwashers
PERSONNEL: Two
PRELIMINARY PROCEDURE: Remove powerplant (page 5-2)
Go on to Sheet 2
7-223