TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 450 of 734

TM 5-5420-202-20-2

FUEL-WATER SEPARATOR DRAIN SOLENOID VALVE REPLACEMENT (Sheet 2 of 3)

3.

Using 1/2 inch wrench, turn fuel-water

separator bleed valve (B) counterclockwise

until loose.

4. Allow fuel in fuel-water separator

filter (C) to drain through drain

valve (A).

7.

8.

9.

10.

Using two 9/16 inch wrenches, disconnect

hose assembly (D) from solenoid valve (E).

Using pliers, disconnect electrical

lead (F) from solenoid valve (E).

Using 5/16 inch wrench, remove

two screws and lockwashers (G)

securing solenoid valve (E) to

bracket.

Remove solenoid valve (E).

NOTE

It will be necessary to secure solenoid

valve (E) in vise.

5.

6.

Close drain valve (A) by

turning valve handle

clockwise.

Move drip pan to catch fuel

from hose assembly (D).

Go on to Sheet 3

11.

Using 9/16 inch wrench, remove

elbow and tube (H) as a unit from

solenoid valve (E).

12.

Using 9/16 inch wrench, remove

adapter (J) from solenoid valve

(E).

7-215