TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 451 of 734

TM 5-5420-202-20-2

FUEL-WATER SEPARATOR DRAIN SOLENOID VALVE REPLACEMENT (Sheet 3 of 3)

INSTALLATION:

End of Task

7-216

1.

2.

3.

4.

5.

6.

NOTE

Coat all exposed threads of

adapter and elbow with zinc-

chromate before installing.

Using 9/16 inch wrench, install elbow

and tube (A) to solenoid valve (B).

Using 9/16 inch wrench, install adapter

(C) in solenoid valve (B).

Position solenoid valve (B) to bracket.

Using 5/16 inch wrench, install two

screws and lockwashers (D) to secure

solenoid valve (B) to bracket (E).

Using two 9/16 inch wrenches, connect

hose assembly (F) to adapter (C).

Connect electrical lead (G) to solenoid

valve (B).

7.

Using 1/2 inch wrench, turn bleed

cap (H) clockwise until snug.

8.

Test fuel-water separator (page 7-223).

9.

Install powerplant (page 5-14).