TM-5-5420-202-20-2
M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4
OCTOBER 1985
TM-5-5420-202-20-2 - Page 457 of 734
TM 5-5420-202-20-2
FUEL-WATER SEPARATOR DRAIN LINES REPLACEMENT (Sheet 6 of 6)
6.
7.
8.
9.
10.
Install tee (F) into vise and, using 11/16 inch wrench, install adapter (G) into tee (F).
Remove tee (F) and adapter (G) assembly from vise.
Position tee (F) and adapter (G)
assembly into mounting bracket (H).
Using 11/16 inch wrench to hold
adapter (G), use 11/16 inch wrench
and install lockwasher and nut (J)
onto adapter (G).
Using adjustable wrench, install
drain valve (K) into tee (F).
17.
18.
11.
Position hose assembly (L)
to adapter (G) and elbow (M).
12.
Using 9/16 inch wrench, install
hose assembly (L) to adapter (G)
and elbow (M).
13.
Using 9/16 inch wrench, install
hose assembly (D) to tee (F).
14.
Position clamp (N) onto hose
assembly (L).
15.
Using 9/16 inch wrench,
(P) to secure clamp (N).
16.
Close drain valve (K) by
clockwise.
Test fuel-water separator (page 7-223).
Install powerplant (page 5-14).
End of Task
7-222
Back to Top
