TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 349 of 750

TM 5-5420-228-24

LOCKING CYLINDER HOSE ASSEMBLIES (CE1, CE2, AND M) AND HYDRAULICS REPLACEMENT

(Sheet 2 of 4)

2 .

Holding tee (E) with adjustable wrench, use

adjustable wrench to remove four elbows (A)

and four collars (F).

3.

4.

Holding nipple (G) with 3/4 inch wrench, use

adjustable wrench to remove tee (E).

Using 3/4 inch wrench, remove nipple (G).

5.

Using 3/4 inch wrench to hold two elbows

(H), use 7/8 inch wrench to remove hose

assemblies “CE1” (C) and “CE2” (D).

6.

Using 3/4 inch wrench to hold elbows (H), use

7/8 inch wrench to loosen elbow nuts (J).

7.

Using 3/4 inch wrench, remove two

elbows (H), elbow nuts (J), flat washers

(K), and preformed packings (L). Throw

away preformed packings (L).

Go on to Sheet 3.

3-152

TA251550