TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 341 of 750

TM 5-5420-228-24

SCISSORS CYLINDER HOSE ASSEMBLIES (CF1, CF2, CG, Cl, AND CJ) AND HYDRAULICS

REPLACEMENT (Sheet 6 of 12)

33.

Using 1/2 inch socket, remove three screws

(AX) and lockwashers (AY) from clamp (AZ).

34.

35.

Remove clamp (AZ) from vehicle.

Holding nipple (BA) with pipe wrench, use

36.

1-5/16 inch wrench to remove quick

disconnect socket (BB).

Remove clamp (BC) from nipple (BA).

37.

38.

39.

Manually remove nipple (BA) with elbow

(AV) from vehicle.

Holding nipple (BA) with pipe wrench, use 12

12 inch adjustable wrench to remove

elbow (AV).

Using 3/8 inch socket, remove screw (BD)

and lockwasher (BE).

40.

Manually remove spring retainer (BF) from vehicle.

41.

42.

43.

44.

Using long round nose pliers, remove two cotter pins (BG) from pins (BH).

Using hammer, tap out pin (BH) while holding handle (BJ).

Manually remove handle (BJ) from vehicle.

Repeat steps 31 through 43 for left side.

Go on to Sheet 7

3-144

TA251542