TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 352 of 750

TM 5-5420-228-24

EJECTION CYLINDER HOSE ASSEMBLIES (CA, CB, CC, AND CD) AND HYDRAULICS

REPLACEMENT (Sheet 1 of 7)

PROCEDURE INDEX

PROCEDURE

PAGE

Removal

3-155

Installation

3-158

TOOLS: 12 in. adjustable wrench (2)

7/8 in. open end wrench

9/16 in. socket with 1/2 in. drive

Ratchet with 1/2 in. drive

3/4 in. open end wrench

SUPPLIES:

Pencil (Item 22, Appendix D)

Rags (It em 12, Appendix D)

Pipe tape (Item 19, Appendix D)

Drip pans (suitable containers)

Masking tape (Item 18, Appendix D)

Preformed packing (2 required)

Lockwashers (8 required)

REFERENCE:

LO 5-5420-202-12

PRELIMINARY PROCEDURES:

Remove front fixed and movable hose armor (page 3-133)

Relieve hydraulic pressure (page 3-71)

REMOVAL:

NOTE

Use rags and drip pans to catch excess hydraulic fluid. Use masking tape to

tag lines for installation.

Go

on to Sheet

2

TA251554

3-155