TM-9-2320-209-20-3-1
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4
MAY 1981
TM-9-2320-209-20-3-1 - Page 48 of 830
TM 9-2320-209-20-3-1
2-4. REAR ENGINE MOUNTS REMOVAL AND REPLACEMENT.
NOTE
This task is shown for the left rear engine
mount.
This task is the same for the right
rear engine mount.
TOOLS :
Hydraulic jack
15/16-inch socket wrench
3/4-inch open end wrench
1/2-inch open end wrench (2)
Bronze hammer
SUPPLIES : Wood block (2)
PERSONNEL :
One
EQUIPMENT CONDITION :
Truck parked, engine off, handbrake set, wheels
chocked.
Preliminary Procedure. Open hood and both side panels. Refer to
TM %-2320-209-10.
2-10
Back to Top
