INSTALLATION
1.
Install washer bottle bracket (Figure 2, Item 4) on firewall (Figure 2, Item 6) with two spacers
(Figure
2,
Item
5), lockwashers (Figure 2, Item 8), spacers (Figure 2, Item 7), protective control box
(Figure
2,
Item
13), ground wire (Figure 2, Item 9), four lockwashers (Figure 2, Item 10), and screws
(Figure
2,
Item
11).
2.
Connect harness connector (Figure 2, Item 12) on protective control box (Figure 2, Item 13). Tighten connector
to 10 lb-ft (14 N·m).
3.
Install windshield washer bottle (Figure 2, Item 3) and windshield washer bottle lid (Figure 2, Item 2) on
windshield bottle bracket (Figure 2, Item 4).
12
M0262DAA
11
13
10
9
8
7
6
5
4
10
11
1
2
3
4
Figure 2.
Protective Control Box Installation.
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Install ether cylinder and valve. (WP
0263)
2.
Connect battery ground cables. (WP
0350)
END OF TASK
END OF WORK PACKAGE
TM 9-2320-272-23-2
0319
0319-3/4 blank