REMOVAL
1.
Remove windshield washer bottle lid (Figure 1, Item 2) and washer bottle (Figure 1, Item 3) from windshield
washer bottle bracket (Figure 1, Item 4). Do not disconnect windshield washer hoses (Figure 1, Item 1).
2.
Disconnect harness connector (Figure 1, Item 12) from protective control box (Figure 1, Item 13).
3.
Remove four screws (Figure 1, Item 11), lockwashers (Figure 1, Item 10), ground wire (Figure 1, Item 9),
protective control box (Figure 1, Item 13), two lockwashers (Figure 1, Item 8), spacers
(Figure
1,
Items
5
and
7), and washer bottle bracket (Figure 1, Item 4) from firewall (Figure 1, Item 6).
Discard
lockwashers.
12
M0261DAA
11
13
10
9
8
7
6
5
4
10
11
1
2
3
4
Figure 1.
Protective Control Box Removal.
END OF TASK
TM 9-2320-272-23-2
0319
0319-2