TM-9-2320-272-23-2
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 2 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-2 - Page 511 of 1417
REMOVAL - Continued
NOTE
•
Tag mounting brackets for installation.
•
Perform Steps (7) through (9) for removing right engine mounting brackets.
7.
Remove two screws (Figure 2, Item 1), washers (Figure 2, Item 2), and four isolators (Figure 2, Item 3) from
upper mounting bracket (Figure 2, Item 9) and lower mounting bracket (Figure 2, Item 8).
8.
Remove four locknuts (Figure 2, Item 7), washers (Figure 2, Item 6), screws (Figure 2, Item 4), and lower
mounting bracket (Figure 2, Item 8) from frame rail (Figure 2, Item 5). Discard locknuts.
9.
Remove four screws (Figure 2, Item 10), washers (Figure 2, Item 11), and upper mounting bracket
(Figure
2,
Item
9) from flywheel housing (Figure 2, Item 12).
M9002DAA
10
11
9
12
4
5
6
7
8
3
1
9
2
3
Figure 2.
Engine Mounting Bracket Removal.
TM 9-2320-272-23-2
0216
0216-4
Back to Top
