TM-9-2320-272-23-2
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 2 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-2 - Page 514 of 1417
INSTALLATION - Continued
NOTE
Perform Steps (5) through (7) for installing right engine mounting brackets.
5.
Install upper mounting bracket (Figure 5, Item 9) on flywheel housing (Figure 5, Item 12) with four washers
(Figure 5, Item 11) and screws (Figure 5, Item 10). Tighten screws 70 to 90 lb-ft (95 to 122 N·m).
6.
Install lower mounting bracket (Figure 5, Item 8) on frame rail (Figure 5, Item 5) with four screws
(Figure
5,
Item
4), washers (Figure 5, Item 6), and locknuts (Figure 5, Item 7).
7.
Install four isolators (Figure 5, Item 3) on upper mounting bracket (Figure 5, Item 9) and lower mounting bracket
(Figure 5, Item 8) with two washers (Figure 5, Item 2) and screws (Figure 5, Item 1). Finger-tighten screws.
M9534DAA
10
11
9
12
4
5
6
7
8
3
1
9
2
3
Figure 5.
Engine Mounting Bracket Installation.
TM 9-2320-272-23-2
0216
0216-7
Back to Top
