TM-9-2320-272-23-2

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 2 OF 5

SEPTEMBER 2012

  TM-9-2320-272-23-2 - Page 512 of 1417

REMOVAL - Continued
NOTE
Perform Steps (10) through (13) for removing left engine mounting brackets.
10.
Remove two locknuts (Figure 3, Item 1), washers (Figure 3, Item 2), isolators (Figure 3, Item 3), screws
(Figure
3, Item
9), and isolators (Figure 3, Item 3) from upper mounting bracket (Figure 3, Item 18) and lower
mounting bracket (Figure 3, Item 6). Discard locknuts.
11.
Remove locknut (Figure 3, Item 12), washer (Figure 3, Item 13), screw (Figure 3, Item 14), washer
(Figure
3,
Item
13), locknut (Figure 3, Item 15), washer (Figure 3, Item 5), screw (Figure 3, Item 4), washer
(Figure 3, Item 5), shim (Figure 3, Item 17), and engine support (Figure 3, Item 16) from frame rail
(Figure
3,
Item
10) and lower mounting bracket (Figure 3, Item 6). Discard locknuts.
12.
Remove four locknuts (Figure 3, Item 8), washers (Figure 3, Item 7), screws (Figure 3, Item 11), and lower
mounting bracket (Figure 3, Item 6) from frame rail (Figure 3, Item 10). Discard locknuts.
13.
Remove four screws (Figure 3, Item 21), washers (Figure 3, Item 20), and upper mounting bracket
(Figure
3,
Item
18) from flywheel housing (Figure 3, Item 19).
M9535DAA
19
18
20
21
1
2
3
3
4
5
6
7
8
9
10
11
12
13
14
15
5
16
17
18
Figure 3.
Engine Mounting Bracket Removal.
END OF TASK
TM 9-2320-272-23-2
0216
0216-5


Back to Top