TM-9-2320-272-23-2
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 2 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-2 - Page 766 of 1417
INSTALLATION
NOTE
•
Male pipe threads must be wrapped with antiseize tape before installation.
•
When installing fuel transmitter unit, do not use screw hole closest to vehicle frame.
Ground wire will be installed at that location.
1.
Position gasket (Figure 4, Item 7) on fuel transmitter unit (Figure 4, Item 2) and install unit (Figure 4, Item 2)
on fuel tank (Figure 4, Item 6) with four screws (Figure 4, Item 1).
2.
Install return line elbow (Figure 4, Item 4) and two vent line elbows (Figure 4, Item 5) on top of fuel tank
(Figure
4,
Item
6).
3.
Install fuel supply tube with elbow (Figure 4, Item 3) on top of tank (Figure 4, Item 6).
M9688DAA
6
7
5
5
4
3
2
1
Figure 4.
Fuel Tank Installation.
TM 9-2320-272-23-2
0250
0250-5
Back to Top
