TM-9-2320-272-23-2
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 2 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-2 - Page 978 of 1417
RADIATOR INLET HOSES AND TUBE INSTALLATION
1.
Install two clamps (Figure 10, Item 4) on upper radiator support (Figure 10, Item 6) with two screws
(Figure
10,
Item 7) and locknuts (Figure 10, Item 5).
2.
Install two clamps (Figure 10, Item 10) and hose (Figure 10, Item 8) on thermostat housing
(Figure
10,
Item
9) and tube (Figure 10, Item 11).
3.
Install inlet hose (Figure 10, Item 1) on radiator (Figure 10, Item 3) and tube (Figure 10, Item 11) with two
clamps (Figure 10, Item 2).
9
M9484DAA
8
7
5
6
4
3
2
1
4
11
10
Figure 10.
Radiator Inlet Hoses and Tube Installation.
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Fill cooling system to proper level. (WP
0287)
2.
Install right splash shield. (TM 9-2320-272-10)
3.
Hood closed and secured. (TM 9-2320-272-10)
4.
Start engine. (TM 9-2320-272-10)
END OF TASK
END OF WORK PACKAGE
TM 9-2320-272-23-2
0280
0280-13/14 blank
Back to Top
