TM-9-2320-272-23-2
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 2 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-2 - Page 986 of 1417
INSTALLATION - Continued
14.
Connect radiator inlet hose (Figure 6, Item 14) to radiator (Figure 6, Item 17) and tighten clamp
(Figure
6,
Item
15).
NOTE
Perform Step (14) only if rubber mounts were removed.
15.
Install two rubber mounts (Figure 6, Item 11) on engine bracket (Figure 6, Item 8).
16.
Install upper radiator bracket (Figure 6, Item 19) on engine bracket (Figure 6, Item 8) with two screws
(Figure
6,
Item
12), washers (Figure 6, Item 10), and locknuts (Figure 6, Item 9).
17.
Install upper radiator bracket (Figure 6, Item 19) on radiator (Figure 6, Item 17) with two washers
(Figure
6,
Item
20), lockwashers (Figure 6, Item 1), and screws (Figure 6, Item 2).
18.
Install two hood stop cables (Figure 6, Item 5) on upper radiator bracket (Figure 6, Item 19) with two screws
(Figure 6, Item 7), washers (Figure 6, Item 6), and locknuts (Figure 6, Item 4).
19.
Install two clamps (Figure 6, Item 18) on upper radiator bracket (Figure 6, Item 19) with two screws
(Figure
6,
Item
13) and locknuts (Figure 6, Item 3).
20.
Connect radiator vent hose (Figure 6, Item 16) on adapter.
M9717DAA
17
20
19
18
1
2
16
15
14
13
12
11
10
9
8
4
3
5
6
7
Figure 6.
Radiator (M939/A1) Installation.
END OF TASK
TM 9-2320-272-23-2
0281
0281-7
Back to Top
