TM-9-2320-272-23-3
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-3 - Page 1012 of 1469
REMOVAL - Continued
M9710DAA
1
2
3
Figure 2.
Front Hub and Drum Replacement.
8.
Remove ten wheel studs (Figure 3, Item 1) and hub (Figure 3, Item 3) from drum (Figure 3, Item 2).
M9709DAA
1
2
3
Figure 3.
Front Hub and Drum Replacement.
END OF TASK
CLEANING AND INSPECTION
WARNING
Solvent cleaning compound is flammable and will not be used near an open flame. A fire
extinguisher will be kept nearby when solvent is used. Use only in well-ventilated places.
Failure to comply may result in damage to equipment, injury, or death to personnel.
1.
Clean gasket or sealant remains from mating surfaces of driveshaft flange and hub.
NOTE
Do not use compressed air to dry bearings.
2.
Clean all hub and drum components in cleaning compound.
3.
Inspect hub for cracks and breaks. Replace hub if cracked or broken.
TM 9-2320-272-23-3
0479
0479-3
Back to Top
