TM-9-2320-272-23-3
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-3 - Page 1021 of 1469
INSTALLATION - Continued
2.
Pack inner bearing (Figure 5, Item 4) and outer bearing (Figure 6, Item 8) with automotive and artillery grease
(TM 9-214).
3.
Pack inner rubber section of inner bearing oil seal (Figure 5, Item 3) with automotive and artillery grease
(TM
9-214).
4.
Position hub (Figure 5, Item 7) on drum (Figure 5, Item 5).
5.
Press wheel studs (Figure 5, Item 6) through drum (Figure 5, Item 5) and hub (Figure 5, Item 7). Ensure studs
are seated.
6.
Install inner bearing (Figure 5, Item 4) and inner bearing oil seal (Figure 5, Item 3) in hub (Figure 5, Item 7).
7.
Using seal inserter, install wiper (Figure 5, Item 2) on axle housing (Figure 5, Item 1).
1
2
3
4
7
6
5
M9634DAA
8
Figure 5.
Rear Hub and Drum Installation.
TM 9-2320-272-23-3
0480
0480-6
Back to Top
