TM-9-2320-272-23-3
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-3 - Page 1372 of 1469
FIELD MAINTENANCE
REAR SPRING REPAIR
INITIAL SETUP:
Tools and Special Tools
Tool Kit, General Mechanic's: Automotive
(Volume 5, WP
0826, Table 1, Item 56)
Wrench, Torque, Click, Ratcheting, 3/4" Drive,
600 Ft-Lb
(Volume 5, WP
0826, Table 1, Item 61)
Materials/Parts
Lockwasher
(Volume 5, WP
0827, Table 1, Item 381)
Qty:
8
Personnel Required
(2)
Equipment Condition
Parking brake set. (TM 9-2320-272-10)
Front wheels chocked. (TM 9-2320-272-10)
Rear wheels removed. (WP
0485)
or (WP
0484)
REMOVAL
1.
Raise vehicle and place two jack stands (Figure 1, Item 2) under cross tube (Figure 1, Item 1). Position tops
of jack stands under cross tube (Figure 1, Item 1) four inches above tops of jack stands to relieve pressure on
rear springs.
1
M9184DAA
2
2
Figure 1.
Rear Spring Removal.
TM 9-2320-272-23-3
0539
0539-1
Back to Top
