REMOVAL
1.
Remove screw (Figure 1, Item 8), lockwasher (Figure 1, Item 6), protective control box ground lead
(Figure
1,
Item
5), and ground jumper lead (Figure 1, Item 4) from protective control box (Figure 1, Item 1)
and route ground jumper lead (Figure 1, Item 4) through grommet (Figure 1, Item 2) on firewall
(Figure
1,
Item
3). Discard lockwasher.
2.
Disconnect ground jumper Y-connector leads (Figure 1, Item 10) from ABS main wiring harness white ground
lead (Figure 1, Item 11) and ABS indicator lamp ground lead connector No. 3 (Figure 1, Item 9).
3.
Remove tiedown straps (Figure 1, Item 7) and ground jumper Y-connector lead (Figure 1, Item 4) from under
instrument panel (Figure 1, Item 12). Discard tiedown straps.
9
10
4
11
12
4
3
2
5
6
7
8
1
M9410DAA
Figure 1.
ABS Ground Jumper Lead Removal.
END OF TASK
TM 9-2320-272-23-3
0465
0465-2