TM-9-2320-272-23-4
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 4 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-4 - Page 1203 of 1393
INSTALLATION
NOTE
•
If new valve is being installed, use fittings from old valve.
•
Wrap all male pipe threads with antiseize tape before installation.
1.
Install manifold tee supply line (Figure 2, Item 1) on elbow (Figure 2, Item 2).
2.
Install delivery line (Figure 2, Item 12) on washer control valve (Figure 2, Item 3) with clamp
(Figure
2,
Item
11).
3.
Install washer control valve (Figure 2, Item 3) on instrument panel (Figure 2, Item 9) with washer
(Figure
2,
Item
4) and nut (Figure 2, Item 5).
4.
Install retaining ring (Figure 2, Item 8) and knob (Figure 2, Item 7) on shaft (Figure 2, Item 10) with setscrew
(Figure 2, Item 6).
M9473DAA
1
2
3
4
5
6
7
8
9
10
11
12
Figure 2.
Washer Control Valve Installation.
END OF TASK
TM 9-2320-272-23-4
0739
0739-4
Back to Top
