TM-9-2320-272-23-4
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 4 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-4 - Page 1208 of 1393
FIELD MAINTENANCE
FRESH AIR VENT CONTROL CABLE ASSEMBLY REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
Tool Kit, General Mechanic's: Automotive
(Volume 5, WP
0826, Table 1, Item 56)
Materials/Parts
Cotter Pin
Materials/Parts (cont.)
(Volume 5, WP
0827, Table 1, Item 257)
Qty:
1
Lockwasher
(Volume 5, WP
0827, Table 1, Item 186)
Qty:
1
Equipment Condition
Parking brake set. (TM 9-2320-272-10)
Hood raised and secured. (TM 9-2320-272-10)
REMOVAL
1.
Remove screw (Figure 1, Item 3), sheet spring nut (Figure 1, Item 5), and clamp bracket (Figure 1, Item 4)
from personnel hot water heater (Figure 1, Item 7).
2.
Remove cotter pin (Figure 1, Item 6), fresh air control cable (Figure 1, Item 2), and clip (Figure 1, Item 1) from
fresh air shutoff rod (Figure 1, Item 8). Discard cotter pin.
1
2
3
4
5
6
7
8
M5168DAA
Figure 1.
Fresh Air Vent Control Assembly Removal.
TM 9-2320-272-23-4
0741
0741-1
Back to Top
