TM-9-2320-272-23-4
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 4 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-4 - Page 1223 of 1393
REMOVAL
NOTE
Tag all cables for installation.
1.
Remove screw (Figure 1, Item 12), clamp (Figure 1, Item 16), defrost cable (Figure 1, Item 14), and retaining
clip (Figure 1, Item 1) from diverter bracket (Figure 1, Item 3).
2.
Remove cotter pin (Figure 1, Item 13), defrost cable (Figure 1, Item 14), and spring nut (Figure 1, Item 15)
from control rod (Figure 1, Item 2). Discard cotter pin and spring nut.
3.
Remove screw (Figure 1, Item 11), clamp (Figure 1, Item 10), heat control cable (Figure 1, Item 9), and retaining
clip (Figure 1, Item 5) from diverter bracket (Figure 1, Item 4).
4.
Remove cotter pin (Figure 1, Item 8), heat control cable (Figure 1, Item 9), and spring nut (Figure 1, Item 7)
from control rod (Figure 1, Item 6). Discard cotter pin and spring nut.
M5172DAA
6
5
4
3
2
7
8
9
11
10
12
13
14
15
16
1
Figure 1.
Defrost and Heat Controls Removal.
TM 9-2320-272-23-4
0745
0745-2
Back to Top
