TM-9-2320-272-23-4
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 4 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-4 - Page 266 of 1393
FABRICATION - Continued
3.
Cut frame rail sill (Figure 3, Item 4) to dimensions and drill ten counterbore holes (Figure 3, Item 3) and three
frame root holes (Figure 3, Item 1) as shown.
4.
Seal and paint frame rail sill (Figure 3, Item 4) (Refer to TM 43-0139).
1
M3008DAA
0.375 ± .01 IN. DIA. THROUGH (9.525 ± 0.254 MM)
0.875 ± .02 IN. DIA. C BORE (22.225 MM)
0.25 ± .02 IN. DEEP (6.35MM)
22.25 IN.
(565.15 MM)
2
3
2
0.25 IN. (6.35 MM)
1.12 IN. (28.448 MM)
2.75 IN.
(69.85 MM)
80.00 IN. (2,032 MM)
20.00 IN.
(508 MM)
20.00 IN.
(508 MM)
60.00 IN. (1,524 MM)
40.00 IN. (1,016 MM)
125.62 ±.25 IN. (3,190.748 ± 6.35 MM)
110.06 ± .25 IN. (2,795.52 ± 6.35 MM)
85.20 IN. (2,164.08 MM)
63.90 IN. (1,623.06 MM)
42.60 IN. (1,082.04 MM)
21.30 IN.
(541.02 MM)
3.38 IN.
(85.852 MM)
2.75 IN.
(69.85 MM)
1.50 IN.
(38.1 MM)
6.50 IN.
(165.1 MM)
2.00 IN.
(50.8 MM)
102.31 IN. (2,598.674 MM)
1.12 IN.
(28.448 MM)
1.00 IN.
(25.4 MM)
1.50 IN. DIA (38.1 MM)
0.312 IN. DEEP (7.925 MM)
3 HOLES
4
4
3
Figure 3.
Cargo Frame Fabrication.
END OF TASK
TM 9-2320-272-23-4
0593
0593-3
Back to Top
