TM-9-2320-272-23-4
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 4 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-4 - Page 767 of 1393
REMOVAL
1.
Remove eight screws (Figure 1, Item 4) and lockwashers (Figure 1, Item 2) from winch roller assembly
(Figure
1,
Item
5). Discard lockwashers.
2.
Remove four screws (Figure 1, Item 3), lockwashers (Figure 1, Item 2), and roller assembly (Figure 1, Item 5)
from winch (Figure 1, Item 1). Discard lockwashers.
3.
Remove two grease fittings (Figure 1, Item 6), right roller bracket (Figure 1, Item 7), and thrust washer
(Figure
1,
Item
8) from roller shaft (Figure 1, Item 9).
M6013DAA
6
9
8
7
6
1
5
2
4
3
2
Figure 1.
Front Winch Roller Assembly Removal.
END OF TASK
DISASSEMBLY
1.
Remove two felt washers (Figure 2, Item 5), bearings (Figure 2, Item 6), and roller (Figure 2, Item 7) from shaft
(Figure 2, Item 2). Discard felt washers.
2.
Remove thrust washer (Figure 2, Item 1) from shaft (Figure 2, Item 2).
NOTE
Both setscrews are in the same hole.
3.
Remove two setscrews (Figure 2, Item 4) from left roller bracket (Figure 2, Item 3).
4.
Remove shaft (Figure 2, Item 2) from bracket (Figure 2, Item 3).
TM 9-2320-272-23-4
0679
0679-2
Back to Top
