TM-9-2320-272-23-4
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 4 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-4 - Page 768 of 1393
DISASSEMBLY - Continued
NOTE
Both side rollers are disassembled the same.
5.
Remove grease fitting (Figure 2, Item 14) from side roller shaft (Figure 2, Item 15).
6.
Remove pin (Figure 2, Item 18) from roller bracket (Figure 2, Item 3) and shaft (Figure 2, Item 15).
7.
Remove two thrust washers (Figure 2, Item 16) and roller (Figure 2, Item 17) from bracket (Figure 2, Item 3).
8.
Remove two screws (Figure 2, Item 8), lockwashers (Figure 2, Item 9), and small side bracket
(Figure
2,
Item
19) from large bracket (Figure 2, Item 12). Discard lockwashers.
9.
Remove two screws (Figure 2, Item 13), nuts (Figure 2, Item 10), lockwashers (Figure 2, Item 11), and large
bracket (Figure 2, Item 12) from roller bracket (Figure 2, Item 3). Discard lockwashers.
M6014DAA
3
4
2
1
5
6
7
6
5
8
9
19
10
11
12
13
3
14
15
16
17
16
18
Figure 2.
Roller Assembly Disassembly.
END OF TASK
TM 9-2320-272-23-4
0679
0679-3
Back to Top
