TM-9-2320-272-23-4
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 4 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-4 - Page 949 of 1393
REMOVAL - Continued
4.
Loosen nut (Figure 2, Item 4) and remove oil return hose (Figure 2, Item 3) from elbow (Figure 2, Item 5).
5.
Remove nut (Figure 2, Item 13), screw (Figure 2, Item 2), clamp (Figure 2, Item 1), and oil return hose
(Figure
2, Item
3) from reservoir (Figure 2, Item 10).
6.
Remove eight locknuts (Figure 2, Item 12) and screws (Figure 2, Item 11) from frame bracket
(Figure
2,
Item
14) and reservoir (Figure 2, Item 10). Discard locknuts.
7.
Remove and pull reservoir (Figure 2, Item 10) out about 2 in. (5 cm) from frame bracket (Figure 2, Item 14).
8.
Remove reservoir (Figure 2, Item 10) from frame bracket (Figure 2, Item 14).
9.
Remove elbow (Figure 2, Item 5) from reservoir (Figure 2, Item 10).
10.
Remove filler cap (Figure 2, Item 9), dipstick (Figure 2, Item 8), spacer (Figure 2, Item 7), and strainer
(Figure
2, Item
6) from reservoir (Figure 2, Item 10).
M5274DAA
1
2
3
4
5
6
7
8
9
10
11
12
11
12
13
14
Figure 2.
Winch Hydraulic Oil Reservoir Removal.
END OF TASK
TM 9-2320-272-23-4
0701
0701-4
Back to Top
