TM-9-2320-272-23-4
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 4 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-4 - Page 950 of 1393
INSTALLATION
NOTE
•
When new hydraulic oil reservoir is installed, use attaching parts and fittings from old
hydraulic oil reservoir.
•
Wrap all male pipe threads with antiseize tape before installation.
1.
Install strainer (Figure 3, Item 6), spacer (Figure 3, Item 7), dipstick (Figure 3, Item 8), and filler cap
(Figure
3,
Item
9) on reservoir (Figure 3, Item 10).
2.
Install elbow (Figure 3, Item 5) on reservoir (Figure 3, Item 10).
3.
Position reservoir (Figure 3, Item 10) on frame bracket (Figure 3, Item 14).
4.
Install reservoir (Figure 3, Item 10) on frame bracket (Figure 3, Item 14) with eight screws (Figure 3, Item 11)
and locknuts (Figure 3, Item 12).
5.
Install oil return hose (Figure 3, Item 3) on elbow (Figure 3, Item 5) and tighten nut (Figure 3, Item 4).
6.
Install oil return hose (Figure 3, Item 3) on reservoir (Figure 3, Item 10) with clamp (Figure 3, Item 1), screw
(Figure 3, Item 2), and nut (Figure 3, Item 13).
1
2
3
4
5
6
7
8
9
10
11
12
11
12
13
14
M5275DAA
Figure 3.
Winch Hydraulic Oil Reservoir Installation.
TM 9-2320-272-23-4
0701
0701-5
Back to Top
