TM-9-2320-272-23-5
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 5 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-5 - Page 192 of 623
FIELD MAINTENANCE
VAN HANDRAIL COMPONENT REPLACEMENT (M934/A1/A2)
INITIAL SETUP:
Tools and Special Tools
Tool Kit, General Mechanic's: Automotive
(WP
0826, Table 1, Item 56)
Materials/Parts
Locknut (WP
0827, Table 1, Item 430) Qty:
4
Lockwasher
(WP
0827, Table 1, Item 403) Qty:
1
Equipment Condition
Parking brake set. (TM 9-2320-272-10)
Ladders removed. (TM 9-2320-272-10)
LADDER HANDRAIL GUIDE REMOVAL
NOTE
All ladder handrail guides are replaced the same way.
1.
Remove four locknuts (Figure 1, Item 6), washers (Figure 1, Item 2), screws (Figure 1, Item 3), washers
(Figure
1,
Item
2), and handrail guide (Figure 1, Item 5) from ladder (Figure 1, Item 4). Discard locknuts.
2.
Remove screw (Figure 1, Item 1) and pin assembly (Figure 1, Item 7) from ladder (Figure 1, Item 4).
3
4
5
M6321DAA
1
2
2
6
7
Figure 1.
Van Handrail Component Removal (M934/A1/A2).
END OF TASK
TM 9-2320-272-23-5
0788
0788-1
Back to Top
