TM 9-2320-273-34
NOTE
If pressure indications are not as specified,
drain transmission oil, clean screen, and
replace with new oil of correct viscosity,
(refer to LO 9-2320-273-12). Repeat test.
If oil pump must be replaced, transmission
case must be disassembled as described in
paragraph 7-17.
7-11. Rear Bearing Support Housing, Bearing, and Seals.
Oil leakage from the rear bearing support housing
may be caused by defective seals in the housing (fig. 7-52). To replace, proceed as follows:
Figure 7-52.
7-56
Rear Bearing Support Housing.