TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980

TM-9-2320-273-34 - Page 614 of 801

TM9-2320-273-34

TA 074405

Figure 16-4. Replace Filter.

16-10. Assembly.

a.

Verify that all parts are clean.

b.

Assemble a new shaft seal (29, fig. 16-3) into the pump body spring side in. Press the seal

until it bottoms out.

c.

Install two end plate seals (19) onto the front end plate ( 18) using a small amount of grease

(item 1, App B) to hold them in place.

d.

Install the front end plate (18) in the pump body (28) by inserting the cam locator pin (17)

through the slot in the plate and into the dowel hole inside the pump body. (If there are two holes,

be sure

to

use the one noted during disassembly. )

e.

Carefully install the cam (1) into the pump body (28) positioning it over the locator pin.

Be sure to assemble the cam with the marked side the same way noted during disassembly. (On models

equipped with two cam pins, install the second pin in the cam.

)

16-9