TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 1286 of 1390

TM 9-2320-328-13&P-2

0311-2

DRAFT

0311

Change 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

4.

Remove three screws (7), lockwashers (8), washers (9), and guard (10) from water tank cradle (11).

Discard

lockwashers.

NOTE

Remove cable ties as required.

5.

Disconnect direct tank fill valve connector (12) from direct tank fill valve wire harness connector (13).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

aa

NOTE

•

Note position of gaskets prior to removal to ensure proper installation.

•

Note orientation of valve prior to removal to ensure proper installation.

6.

With the aid of an assistant, remove eight screws (14), lockwashers (15), washers (16), gasket (17),

valve (18), gasket (19), spacer (20), and gasket (21) from flange (22) and water tank (23).

Discard

lockwashers and gaskets.

END OF TASK

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT3522

HWT2174A