TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 1288 of 1390

TM 9-2320-328-13&P-2

0311-4

DRAFT

0311

Change 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

6.

Connect direct tank fill valve wire harness connector (13) on direct tank fill valve connector (12).

NOTE

Install cable ties as required.

7.

Install guard (10) on water tank cradle (11) with three washers (9), lockwashers (8), and screws (7).

8.

Install wire rope (6) on cap (4) and vehicle (WP 0369).

9.

Install cap (4) on direct tank fill pipe (5).

10. Install clamp (2) on bracket (3) with two locknuts (1).

END OF TASK

FOLLOW-ON MAINTENANCE

Remove wheel chocks (TM 9-2320-422-10)

END OF TASK

END OF WORK PACKAGE

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT3522

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT3382