TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 1289 of 1390

TM 9-2320-328-13&P-2

0312-1

DRAFT

0312

FIELD LEVEL MAINTENANCE

BUMPER TURRET VALVE REPLACEMENT

INITIAL SETUP:

REMOVAL

NOTE

Tag and mark air lines prior to removal to ensure proper installation.

1.

Remove two air lines (1) and (2) from fittings (3) and (4).

2.

With the aid of an assistant, remove two couplings (5) and (6) and bumper turret valve (7) from

vehicle (WP 0313).

NOTE

Tag and mark fittings prior to removal to ensure proper installation.

3.

Remove two fittings (3) and (4) from bumper turret valve (7).

END OF TASK

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT0136

Tools and Special Tools

Tool Kit, General Mechanic’s: Automotive

(WP 0398, Item 17)

Materials/Parts

Compound, Sealing, Pipe Thread

(WP 0400, Item 11)

Tags, Identification (WP 0400, Item 23)

Personnel Required

MOS 63B Wheeled Vehicle Mechanic (2)

References

WP 0313

WP 0391, Fig. 64

Equipment Conditions

Air system drained (TM 9-2320-422-10)

Lower heat exchanger shroud

removed (WP 0135)