TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 210 of 1390

TM 9-2320-328-13&P-2

0125-8

DRAFT

0125

Change 1

.

HWT1502

.

Step 11.

Pull battery disconnect switch to off position (WP 0007). Put EMERG MASTER switch

to off position (WP 0004).

Remove skid plate grille (WP 0349). Cut main wire harness

siren speaker butt splice connector wire 1052 (brown) at siren speaker. Remove cab

instrument panel A (WP 0205).

Disconnect cab power distribution wire harness siren

control MP2 connector. With a test lead set, check for continuity across wire 1052

(brown) from main wire harness siren speaker butt splice connector, termination to cab

power distribution wire harness siren control MP2 connector, terminal A.

.

If there is continuity, go to Step 13.

.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION