TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 213 of 1390

TM 9-2320-328-13&P-2

0125-11

DRAFT

0125

Change 1

.

HWT1501

.

Step 14.

Disconnect main wire harness main 1 connector. With a test lead set, check for

continuity across wire 1053 (yellow), from main wire harness main 1 connector, terminal

2 to main wire harness siren speaker butt splice connector, termination.

.

a.

If there is continuity, repair wire 1053 in cab power distribution wire

harness if repairable (TM 9-2320-325-14&P), or replace cab power

distribution wire harness and block (WP 0280).

.

b.

If there is no continuity, repair wire 1053 in main wire harness if

repairable (TM 9-2320-325-14&P), or replace main wire

harness (WP 0292).

.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION