TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009
TM-9-2320-328-13-P-2

  TM-9-2320-328-13-P-2 - Page 227 of 1390

TM 9-2320-328-13&P-2
0127-7
DRAFT
0127
HWT2600
Step 12.
Remove pump house panel G (WP 0339).
Disconnect pump house wire harness pump
house heater two terminal connector.
With a test lead set, check for continuity across
wire 4090 (purple) from pump house wire harness pump house heater two terminal
connector, terminal 2 to main wire harness pump house heater fuel pump, terminal.
If there is continuity, replace pump house heater (WP 0310).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION


Back to Top